6537-22
 |
|
Super Sawzall
- The patented Counter Balance Mechanism makes the Super Sawzall
the smoothest operating, most vibration free saw in the world.
- This High Performance Super Sawzall, at 10 amps, incorporates
the patented gear protection system which absorbs high impact forces caused by sudden
blade lock-up thereby extending the life of the tool even under the most extreme cutting
conditions.
- Trigger Speed Control from 0-3200 SPM allows the operator to
match the speed of the tool to the application.
- The new Heavy Duty Steel Quik-Lok Blade Clamp System enables
the user to change blades fast and easy without the use of a Hex Wrench.
- Standard Equipment includes a Steel Carrying Case and two
blades.
|
|
|
|
6515-22
 |
|
18V Cordless Sawzall
- This Cordless 18 volt Power Plus Sawzall cuts up to 60 2 x 4's
on a single charge.
- The 2.0 amp hour battery delivers more run time and is
compatible/interchangeable with all other MILWAUKEE 18 volt Power Plus tools.
- The universal one hour charger can be used to charge any
MILWAUKEE Power Plus Battery.
- The rare-earth, permanent magnet motor delivers high torque
for tough cutting applications.
- The NEW steel Quik-Lok Blade clamp accepts universal 1/2 inch
shank Sawzall blades without the need of a hex key.
- A heat shield prevents heat build up on the blade clamp.
- A lock-off Trigger Speed Control (0-2000 SPM) switch prevents
inadvertent start up.
- Blade clamp accepts blade upside down for close quarter
cutting.
- The 18 Volt Sawzall is an essential tool for HVAC Contractors,
plumbers, electricians, maintenance workers and remodelers.
- Sold with two batteries, charger, two blades and steel
carrying case.
|
|
|
|
0514-22
 |
|
14.4 V Cordless Hammer/Drill
- If you have been dissatisfied with other cordless tools
Step-Up to Milwaukee Contractor cordless. The14.4 volt T-Handle Hammer/Drill has a
reversible battery for working in tight spaces and better balance for overhead work.
- With 350 in/lbs. of torque, speeds of 0-450/1250 rpm and
hammer action at 26,000 bpm this tool can be used to drill and set anchors in concrete.
- With 19 different clutch positions this tool is also used as a
drill or screwdriver. Drill or screw into wood, metal, composites, drywall and other
materials. The soft grip reduces pressure points and absorbs tool vibrations. The T-Handle
design provides optimum balance and comfort.
- Milwaukee products have a limited lifetime warranty.
- The 0514-22 comes with the Driver/Drill, two batteries, one
hour charger and case.
|
|
|
|
5378-20
 |
|
1/2" Hammer Drill
- At 6.5 amps this Heavy Duty Pistol Grip Hammer Drill can
handle the toughest drilling of 1/2 inch holes in concrete.
- With Dual Range Speed Control, the operator can choose more
power to speed for the toughest applications or more speed and less torque for lighter
applications.
- Equipped with a removable side handle, the side handle also
assists in setting the depth rod for pre-set hole drilling.
- Use for drilling in wood, with Flat Boring Bits, Hole Saws,
Auger Bits, and Selfeed Bits. It can also be used to drill in steel with Twist Bits and in
Concrete with Percussion Bits.
- Includes tool, depth gauge, side handle and keyed chuck.
|
|
|
|
0234-6
 |
|
1/2" Corded Drill
- This Heavy-Duty Magnum drill is built for
Industrial/Construction applications.
- It features raw power with a Milwaukee built 5.5 amp motor,
0-1200 rpm trigger speed control, reversing, and a Quik-Lok cord that can be quickly
removed from the drill for storage or service replacement.
- Another exclusive feature is the brush
cartridge system, with a set of spare
brushes, that allows you to change
brushes in less than one minute. Use this
tool with a variety of accessories to drill
into wood, metal, plastics and
composites. Milwaukee products have a
limited lifetime warranty.
- Ergononically designed horizontal handle for greater comfort
- Extra wide steel base for increased stability, four
pre-drilled holes that allow for easy bolt down to work bench
- Adjustable spark guard
- On-board wheel change wrench
|
